Skip to main content

Situated in a quiet area of Da Nang City, Cham Museum



Entrance to the Cham Museum
Situated in a quiet area of Da Nang City, Cham Museum was built in 1915 according to the motifs of ancient Cham Architecture. At first it was named the Henry Parmenties Museum. The museum is officially known as the Museum of Champa Sculpture. The kingdom of Champa (or Lin-yi in Chinese records) controlled what is now south and central Vietnam from approximately 192 through 1697. The empire began to decline in the late 15th century, became a Vietnamese vassal state in 1697, and was finally dissolved in 1832. At present, the museum houses 297 stone and terracotta sculptural works made between the 7th and the 15th centuries. These are impressive works typical of the Cham culture.

A Brief History of the Champa
According to Chinese chronicles, the Champa kingdom was founded in 192 A.D and had different names such as Lin-Yi, Huang-Wang and Chang-Chen. Its territories stretched from south of the Ngang Pass in Quang Binh Province to the delta area of the Dong Nai River in Binh Thuan Province. It included the coastal plains, highland and mountain ranges.
Influenced by the early Hindu civilization, the Champa kingdom was a federation of several smaller states called Mandala and comprised several ethnic groups.
The most important legacy of the Champa kingdom is located in Central Vietnam in the form of brick temples and towers which are scattered over the coastal lowlands and highlands. The structures date from between the 7th and 8th centuries to the 16th and 17th centuries and are concentrated in Quang Nam, DanangBinh DinhKhanh Hoa, Ninh Thuan and Binh Thuan.
The most extensive collection of Cham art worldwide...
The Cham Museum was built in Cham architectural style, using thin lines that are simple and gentle. The museum displays an intensive and diverse collection of Champa sculpture dating from the 7th to the 15th centuries, when a matriarchal society prevailed.
Sculpture in Cham Museum

The museum was established at the end of the 19th century by the Ecole Francaise d'Extreme Orient with a collection of artifacts gathered in central Vietnam, from Quang Binh to Binh Dinh. They were then displayed at Le Jardin de Tourane on a small hill by the Han River. This is the site of the present museum. The building was designed by two French architects, Delaval and Auclair, in imitation of the most commonly used aspects of Champa towers and temples. At present, the museum displays approximately 300 sandstone and terra-cotta sculptures, among which some are made from terracotta. Most of the artifacts are masterpieces of Champa art and some are considered to be equal to works anywhere in the world. The sculptures were collected from Cham temples and towers throughout Central Vietnam, more specifically the area stretching from Quang Binh to Binh Thuan. All the sculptures are displayed in ten showrooms named after the localities where the pieces have been discovered.
After viewing the pieces in the showrooms, you can visit exterior exhibitions. The arts of the Champa were chiefly sculpture, but the sculptures are only part of the religious architecture. The temples and towers themselves are considered to be sculptural artifacts. They are decorated on the exterior of their brick walls with bas-relief columns, flowers and leaves and worshipping figures between brick pillars. The tympana, lintels and the ornamental corner pieces are of sandstones carved with the figures of gods, the holy animals of the Hindus and flowers and leaves.
The artifacts displayed at the museum are altars, statues and decorative works collected from Hindu and Buddhist temples and towers. Champa sculpture displays various styles. Sometimes they were influenced by other cultures but no matter at what period or in what style the Champa artifacts were made they always displayed original characteristics.
Visitors to the museum will have the opportunity to appreciate the eight centuries of evolution of Champa sculpture from its golden age to its decline. In their own way, the artifacts exemplify the rise and fall of the Champa civilization. When we stand before these artistic masterpieces we can comprehend the noblest ideal of art, the creation of the infinite from the finite. The eight centuries of art at the Champa museum is a thick history book reflecting the ups and downs of Champa art. From inanimate stones came living art, and from these wonderful invaluable artifacts we can get the feeling that the warmth from the Champa artists' hand is still there, on the fine skin of the stone-timeless.
Lions
The sculptures displayed here almost have the same drifting life as the very destiny of the once-glorious culture that generated them. Through the ruins of time, war and even the oblivion, such original Champa sculptures were hardly collected and brought here by many human generations. And in this systematic collection, these works of the ancient Champa artists again have a new life.

Coming to visit the museum, it seems that you can see again the glorious time of the past of a nation for whom both the passion for art and the creative talent were already at a very high level. The mysterious world of deities, the pictorial legends, the religious symbols, the curving lines of the bodies of dancing girls, the features of full swelling breasts, the smiles of a vague time, all of these are shown very lively and in much in details.
The art of Champa, although influenced by the Hindu themes of India and Southeast Asia, has many elements that make it distinctive. Temples in Champa were made of bricks. As a result, artists did not have long expanses of wall to decorate with bas-reliefs depicting Hindu epics or phases of Buddhist life as seen, for example, at Angkor Wat. The Chams incorporated their sculptures into their temple architecture by carving them separately and making them part of the construction. These carvings are classified into four main groups: Icons; Pedestals; Pediments; Fragments of architectural decorations at the base or on various ties of the temple.

Comments

Popular posts from this blog

Drilling, Boring, Reaming, Taping

V. Khoan, khoét, doa và tarô (drilling, boring, reaming and taping) Khoan, khoét, doa là các phương pháp gia công lỗ nhưng khả năng công nghệ khác nhau do đó phạm vi sử dụng cũng khác nhau A. Khoan (drilling) - Khoan là phương pháp tạo lỗ từ phôi đặc trên các máy khoan, máy tiện, máy phay vạn năng, … - Khoan là nguyên công chuẩn bị cho cắt ren, tiện ren, tiện tinh, … - Có khả năng tạo lỗ có đường kính từ 0,1~80mm - Đối với lỗ >20mm, tạo lỗ thô ban đầu bằng đúc hay gia công áp lực 1. Chuyển động tạo hình - Khoan bằng máy khoan: dao quay và tịnh tiến, chi tiết đứng yên - Khoan trên máy tiện: chi tiết quay, mũi khoan tịnh tiến - Khoan trên máy phay vạn năng: mũi khoan quay, chi tiết tịnh tiến HCM City Univ. of Technology, Mechanical Engineering Department Nguyen Tan Tien - Phan Hoang Long General Mechanical Engineering 4.106 2. Dụng cụ cắt (mũi khoan) 3. Máy - Máy khoan bàn HCM City Univ. of Technology, Mechanical Engineering Department

Bàn giao máy rà van Larslap model K AB 100/150

  Máy rà van Larslap model K AB 100/150 là dòng máy rà va n được sử dụng cho sửa chữa van cầu, van an toàn, ... có đường kính từ 1/4"-4" Model K AB có khả năng mài được cả các van đế phẳng và đế côn. Tùy vào độ côn 3 độ hoặc 5 độ, khách hàng có thể tùy ý lựa chọn các phụ kiện đi kèm máy. Máy được trang bị sẵn 3 phiên bản điện, pin, khí nén, tùy thuộc vào nhu cầu sử dụng của khách . Thông thường, ở thị trường Việt Nam, khách hàng thay sử dụng máy chạy điện, do đặc tính tiện lợi về nguồn điện. Cấu hình của máy rà van model K AB 100/150 Số lượng Mô tả 1 Động cơ điện 1 Khớp  nối cho mài đế van côn 1 Trục ngắn I 1 Trục dài II 1 Côn định tâm I , II, III 1 Khớp nối trục và đĩa mài 8mm -1/4” 1 Đĩa mài  24mm 1 Đĩa mài 30mm 1 Đĩa mài 35mm, gồm đĩa dẫn hướng. 1 Đĩa mài 42mm, gồm đĩa dẫn hướng. 1 Đĩa mài 52mm, gồm đĩa dẫn hướng. 1 Đĩa mài 65mm, gồm đĩa dẫn hướng. 1 Đĩa mài 75mm, gồm đĩa dẫn hướng. 1 Đĩa mài 95mm, gồm đĩa dẫn hướng. 1 Đĩa mài 120mm, gồm đĩa dẫn hướng. 1 Đĩa mài 170mm, gồ

Dụng cụ rút ống bình ngưng Sugino (9-11mm)

Dụng cụ rút ống bình ngưng của Sugino ( xuất xứ: Nhật Bản) được sử dụng rộng rãi trong các nhà máy chế tạo nồi hơi, bình ngưng .... Đặc biệt là trong phân xưởng sửa chữa, bảo dưỡng các nhà máy công nghiệp như: nhiệt điện, dầu khí, hóa chất,.... Được thành lập từ năm 1918, với kinh nghiệm hơn 100 năm chuyên sản xuất các thiết bị gia công, chế tạo, sửa chữa bộ trao đổi nhiệt, Sugino chắc chắn mang đến những giải pháp tốt nhất tới khách hàng. Chúng tôi xin giới thiệu tới Quý Khách Hàng dòng máy rút ống bình ngưng giá rẻ, đang được sử dụng rộng rãi tại Việt Nam.  Đa số các đơn vị gia công, sửa chữa dịch vụ đều sử dụng bộ dụng cụ này, với ưu điểm: Tiết kiệm chi phí nhờ giá thành rẻ. Dễ dàng tháo lắp, di chuyển. Phù hợp với nhiều loại đường kính ống . An toàn cho người sử dụng, và thiết bị. Cấu hình bộ rút ống bình ngưng Sugino. STT Mô tả Số lượng. 1 Cylinder for tube puller. Xi lanh thủy lực kéo ống. 1set 2 Electric motor driven pump EPU-30.Input voltage : single phase EPU-30. Bơm điện EP